Info On Bitcoin - Crypto News Now.

How can I get this script to work for Litecoin 0.8.7.5?

What would I need to do to get this script to work for Litecoin 0.8.7.5? https://github.com/litecoin-project/litecoin/releases/tag/v0.8.7.5
 class Bitcoin { // Configuration options private $username; private $password; private $proto; private $host; private $port; private $url; private $CACertificate; // Information and debugging public $status; public $error; public $raw_response; public $response; private $id = 0; /** * @param string $username * @param string $password * @param string $host * @param int $port * @param string $proto * @param string $url */ function __construct($username, $password, $host = 'localhost', $port = 8332, $url = null) { $this->username = $username; $this->password = $password; $this->host = $host; $this->port = $port; $this->url = $url; // Set some defaults $this->proto = $host == 'localhost' ? 'http':'https'; $this->CACertificate = null; } /** * @param string|null $certificate */ function setSSL($certificate = null) { $this->proto = 'https'; // force HTTPS $this->CACertificate = $certificate; } function __call($method, $params) { $this->status = null; $this->error = null; $this->raw_response = null; $this->response = null; // If no parameters are passed, this will be an empty array $params = array_values($params); // The ID should be unique for each call $this->id++; // Build the request, it's ok that params might have any empty array $request = json_encode(array( 'method' => $method, 'params' => $params, 'id' => $this->id )); // Build the cURL session $curl = curl_init("{$this->proto}://{$this->username}:{$this->password}@{$this->host}:{$this->port}/{$this->url}"); $options = array( CURLOPT_RETURNTRANSFER => TRUE, CURLOPT_FOLLOWLOCATION => TRUE, CURLOPT_MAXREDIRS => 10, CURLOPT_HTTPHEADER => array('Content-type: application/json'), CURLOPT_POST => TRUE, CURLOPT_POSTFIELDS => $request ); if ($this->proto == 'https') { // If the CA Certificate was specified we change CURL to look for it if ($this->CACertificate != null) { $options[CURLOPT_CAINFO] = $this->CACertificate; $options[CURLOPT_CAPATH] = DIRNAME($this->CACertificate); } else { // If not we need to assume the SSL cannot be verified so we set this flag to FALSE to allow the connection $options[CURLOPT_SSL_VERIFYPEER] = FALSE; } } curl_setopt_array($curl, $options); // Execute the request and decode to an array $this->raw_response = curl_exec($curl); $this->response = json_decode($this->raw_response, TRUE); //error_log('this->response: '. print_r($this->response,true)); // If the status is not 200, something is wrong $this->status = curl_getinfo($curl, CURLINFO_HTTP_CODE); // If there was no error, this will be an empty string $curl_error = curl_error($curl); curl_close($curl); if (!empty($curl_error)) { $this->error = $curl_error; } if ($this->response['error']) { // If bitcoind returned an error, put that in $this->error $this->error = $this->response['error']['message']; } elseif ($this->status != 200) { // If bitcoind didn't return a nice error message, we need to make our own switch ($this->status) { case 400: $this->error = 'HTTP_BAD_REQUEST'; break; case 401: $this->error = 'HTTP_UNAUTHORIZED'; break; case 403: $this->error = 'HTTP_FORBIDDEN'; break; case 404: $this->error = 'HTTP_NOT_FOUND'; break; } } if ($this->error) { return FALSE; } return $this->response['result']; } } /* Address History Interface Class */ class AddressHistory { public $address = null; public $n_tx = 0; public $total_sent = 0; public $total_received = 0; public $balance = 0; public $final_balance = 0; public $txns = array(); public function __construct($txn=null) { if(! is_array($txn)) return null; if(array_key_exists('address', $txn)) $this->address = $txn['address']; if(array_key_exists('n_tx', $txn)) $this->n_tx = $txn['n_tx']; if(array_key_exists('total_sent', $txn)) $this->total_sent = $txn['total_sent']; if(array_key_exists('total_received', $txn))$this->total_received = $txn['total_received']; if(array_key_exists('balance', $txn)) $this->balance = $txn['balance']; if(array_key_exists('final_balance', $txn)) $this->final_balance = $txn['final_balance']; if(is_array($txn['txns'])) { foreach($txn['txns'] as $key => $this_txn) { $new_txn = array( 'hash' => $this_txn['hash'], 'block_height' => $this_txn['block_height'], 'value' => $this_txn['value'], 'spent' => $this_txn['spent'], 'spent_by' => $this_txn['spent_by'], 'confirmations'=> $this_txn['confirmations'] ); $this->txns[$key] = new TransRef($new_txn); } } else { $this->txns = null; } return $this; } } /* Transaction Reference Interface Class */ class TransRef { public $hash; public $block_height; public $value; public $spent; public $spent_by; public $confirmations; public function __construct($txnref=null) { if(! is_array($txnref)) return null; if(array_key_exists('hash', $txnref)) $this->hash = $txnref['hash']; if(array_key_exists('block_height', $txnref)) $this->block_height = $txnref['block_height']; if(array_key_exists('value', $txnref)) $this->value = $txnref['value']; if(array_key_exists('spent', $txnref)) $this->spent = $txnref['spent']; if(array_key_exists('spent_by', $txnref)) $this->spent_by = $txnref['spent_by']; if(array_key_exists('confirmations', $txnref)) $this->confirmations = $txnref['confirmations']; return $this; } } /* CoindRPC - JsonRPC Class to talk to bitcoind */ class CoindRPC extends Bitcoin { public function __construct() { return parent::__construct(WN_RPC_USER, WN_RPC_PASS, WN_RPC_HOST, WN_RPC_PORT); } public function __call($method, $params) { return parent::__call($method, $params); } public function get_address_balance($address, $confirmations=0) { try { $address_info = $this->validateaddress($address); if($address_info['isvalid'] == 1 && $address_info['ismine'] == 1) { $balance = $this->getreceivedbyaddress($address, $confirmations); } if($balance != '') { return floatval($balance); } else { return 0; } } catch (Exception $e) { error_log('error: '. print_r($e->getMessage(),true)); error_log('['.__LINE__.'] : '.__FILE__); } } public function get_address_history($address) { try { $address_info = $this->validateaddress($address); if($address_info['isvalid'] == 1 && $address_info['ismine'] == 1) { //- if only listening to one BTC account //$history = $this->listtransactions(WN_RPC_ACCT); $history = $this->listtransactions(); $txns = array(); $final_balance = $balance = 0; foreach($history as $txn) { if($txn['address'] != $address) continue; $n_tx = $total_received = $total_sent = 0; $n_tx = intval($addr_hist['n_tx']) + 1; switch($txn['category']) { case('receive'): $total_received = $addr_hist['total_received'] += $txn['amount']; $balance = $balance + $txn['amount']; //- can we trust final balance here? do we need more history $final_balance = $final_balance + $txn['amount']; break; case('send'): $total_sent = $addr_hist['total_sent'] += $txn['amount']; $balance = $balance + $txn['amount']; //- can we trust final balance here? do we need more history $final_balance = $final_balance + $txn['amount']; break; } $txns[] = array( 'hash' => $txn['txid'], 'value' => $txn['amount'], 'spent' => $txn['spent'], 'spent_by' => $txn['spent_by'], 'confirmations' => $txn['confirmations'], ); } $addr_hist = array( 'address' => $address, 'n_tx' => $n_tx, 'total_sent' => $total_sent, 'total_received' => $total_received, 'balance' => $balance, 'final_balance' => $final_balance, 'txns' => $txns ); $addr_hist = new AddressHistory($addr_hist); } else { $addr_hist = false; error_log('Address invalid: '.$address); error_log('['.__LINE__.'] : '.__FILE__); } return $addr_hist; } catch (Exception $e) { error_log('error: '. print_r($e->getMessage(),true)); error_log('['.__LINE__.'] : '.__FILE__); } } public function get_transaction($hash) { try { return $this->gettransaction($hash); } catch (Exception $e) { error_log('error: '. print_r($e->getMessage(),true)); error_log('['.__LINE__.'] : '.__FILE__); } } } /* Helper class */ class Helper { public static $api = null; public static $db = null; public function __construct($db, $api) { Helper::$api = $api; Helper::$db = $db; } public static function walletnotify_email($txnhead) { //- bitcoind calls walletnotify on 0 confirmations and 1. //- We only want email to go out on the first call. Otherwise //- if we want only one 1 confrime, change this to //- confirmations == 0) return; if($txnhead['confirmations'] > 0) return; $tmpl = file_get_contents('email.notify.tmpl.html'); foreach($txnhead as $key => $val) { $map['{'.$key.'}'] = $val; } $map['{timestamp}'] = date('Y-m-d H:i:s', WN_GLOBAL_TIMESTAMP); $map['{hostname}'] = php_uname('n'); $html = str_replace(array_keys($map), array_values($map), $tmpl); $txid_short = substr($txnhead['txid'], 0, 4).' .. '.substr($txnhead['txid'], -4); $msg = "=WNotify=". "\ntxid: ".$txid_short. "\nAmt : ".$txnhead['amount']. "\nCmnt: ".$txnhead['comment']. "\nAcct: ".$txnhead['account']. "\nConf: ".$txnhead['confirmations']. "\nCat : ".$txnhead['category']. "\nAddr: ".$txnhead['address']. ""; //- send to carrier's email to SMS gateway if configured if(defined('WN_SMS_ADMIN') && filter_var(WN_SMS_ADMIN, FILTER_VALIDATE_EMAIL)) { Helper::send_email_sms($msg, WN_SMS_ADMIN); } return Helper::send_email($html, 'WN:WalletNotify', WN_EMAIL_ADMIN);; } public static function send_email($msg, $subj, $to) { $headers = 'From: '.WN_EMAIL_FROM."\r\n"; $headers .= "MIME-Version: 1.0\r\n"; $headers .= "Content-Type: text/html; charset=ISO-8859-1\r\n"; if(trim($msg) == '') return false; return mail($to, $subj, $msg, $headers); } public static function send_email_sms($msg, $to) { if(trim($msg) == '') return false; if($to == '') return false; $headers = 'From: '.WN_EMAIL_FROM."\r\n"; return mail($to, null, $msg."\n.", $headers); } } 
submitted by Mjjjokes to cryptodevs [link] [comments]

PIVX Core Wallet 3.0.5 final release (November 13th, 2017) - Mandatory Upgrade

Github release link
Forum Post

Important Notes

Upgrade instructions

1- Download the appropriate release for your platform from the Github release link. For command line installs/updates this link may help.
2- Start up your client and see if you are on the wrong chain by using this link (Am I forked?) or manually comparing your latest block hash against the [block explorer](www.presstab.pw/phpexplorePIVX/index.php#)
3- If you are on the correct chain, let it fully sync (or as far as it will go) and then repeat step 2. If you are still on the right chain move on to step 4. If you're on the wrong chain, download the chainstate from this link (mirror) and follow the instructions to install it. Do NOT delete wallet.dat or your backups folder. Once this is done, restart your client and let it finish syncing
  1. stop your wallet and/or daemon
  2. locate the folder with the blockchain folders (usually ~/.pivx/)
  3. do a complete(!) backup of this folder in case something goes wrong
  4. completely remove the folders "blocks", "chainstate", "sporks" and "zerocoin"
  5. download one of the snapshot-files (preferably the newest one) above into this folder
  6. unpack the snapshot file: 'unzip '
  7. the folders deleted above are now replaced by the ones from the snapshot
  8. restart your wallet and/or daemon
4- On this step you should be fully synced and on the right chain. Using the debug screen or pivx-cli, use the command
spork show 
to output your spork status. Have a look at spork 16 and make sure the value is 1510179528 (now 1609459199). If it is, go ahead and start staking.
If you are having trouble getting the correct value for spork 16, try adding nodes to your pivx.conf file that are protocol 70912. A list of 70912 nodes can be found at http://www.presstab.pw/phpexplorePIVX/nodes.php . This can be done from the debug menu or with pivx-cli by saying
addnode 123.45.67.89 add 

Notable Changes

libzerocoin Exploit Fix

zPIV relies on a 3rd party library called libzerocoin. All currencies that utilize the zerocoin protocol use libzerocoin, and many of those currencies have been exposed to an exploit which allowed for the creation of multiple zero-knowledge spending proofs for one single zerocoin mint. The PIVX developers were able properly identify the exploit, track down any fraudulent spending proofs, link the fraudulent spending proofs with their one valid proof that they were mutated from, and remove any mints from the accumulators that were derived from the invalid spends.

zPIV Maintenance Mode Spork

Handling the above noted libzerocoin exploit required the PIVX team to immediately release a patched wallet to as many users as possible which rejected bad spends and also disabled all zPIV transactions in general. The process of releasing a patched wallet in such a small time frame is frustrating and difficult for all members of the PIVX team and especially users of PIVX. The PIVX developers have added a new spork which allows for zPIV transacting to be turned on/off without having to release a patched wallet. This will allow much smoother operation if any problems occur in the future, and should also allow exchanges and 3rd party services to continue to operate even if zPIV is in maintenance mode.

Accumulator Code Refactor

The zPIV accumulator code has undergone a major refactor. Accumulators are one of the most essential components of the zerocoin protocol, and also one of the most computationally expensive parts of the protocol. This refactoring speeds up syncing and spending of zPIV by over 5x. The new code also allows for spending of zPIV with only 2 required mints occurring on the network after your mint has been added, whereas before 3 were required. This refactor allows for lighter resource load and a smoother user experience.

Money Supply Indexing

The exploit in libzerocoin threw off some of the wallet's internal money supply calculations for both the zPIV supply and the PIV supply. User's wallet's will automatically recalculate the supply on block 908001. User's also have the ability to recalculate supply using the startup flag reindexmoneysupply.

More Extensive Tracking of zPIV Supply Through RPC

More information has been added to the getinfo and getblock RPC calls, which now display the total zPIV supply as well as the balance for each zPIV accumulator.

Multisig GUI

Provides functionality which is currently only available through raw transactions. Multisignature addresses require signatures from multiple parties before coins belonging to the address are spent. Accessed through the File dropdown menu.

Credits

FAQ

  • Will I lose piv or zpiv?
    • No. Backup your wallet.dat again for good measure and never delete a wallet.dat file.
  • My wallet is stuck on block ?
    • Check if you're forked (Am I forked?) and then check if you're really on v3.0.5. If you're on the right version and chain, just hang tight and your wallet will find a good node to sync with eventually. Contact support if it's more than a few hours and the problem persists
  • My zPIV balance is incorrect
    • Contact support in discord or via the Support Portal. Please note that during the upgrade period and zerocoin maintenance mode there may be delays.
submitted by turtleflax to pivx [link] [comments]

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

How to Mine BiblePay on Windows

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Windows Guide: 1. Download 32 or 64 bit .exe from https://www.biblepay.org/wallet/ 2. Double Click / Run .exe file and step through Install process 3. Run BiblePay 4. Click Tools >> One Click Mining, (Or set up mining manually with steps a through d below)
     a. Open File Explorer, in address bar type: %appdata%      b. Press Enter      c. Go to BiblepayEvolution folder      d. Open biblepay.conf file for editing, add lines and Save
addnode=node.biblepay.org gen=1 genproclimit=1 
NOTE: addnode is used to give the wallet a starting node to connect to and sync with gen=1 turns on mining by default when the wallet is opened genproclimit=1 sets number of mining threads to 1 by default

5. Close BiblePay and Run it again 6. In BiblePay, go to Tools menu, Click Debug Console 7. Type these commands into the debug console:
getinfo getmininginfo help 
NOTE: getinfo will show you what block number your wallet is currently on and the version number getmininginfo will show you how many threads are running and how much mining hash you have help will show you all the other commands you can use

Threads: 8. To change number of threads to use up for mining
a. Edit %appdata%/BiblepayEvolution/biblepay.conf file: Find with File Explorer or inside the wallet go to Menu >> Tools >> Open Wallet Configuration File
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with the number of threads you want to use Open Task Manager to view CPU usage)

Using the Pool:
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add (NOTE: Your Worker Username needs to be unique)
  3. Enable pool and add Worker Username in %appdata%/BiblepayEvolution/biblepay.conf file, add these lines:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
How to Withdraw Coins From Pool? The pool holds onto your coins, go to "Account" >> "Withdraw" to withdraw your coins In your BiblePay Wallet go to "File" >> "Receiving Address" and you can right click and copy the address and paste it into the Pool's Withdraw screen as the "Destination Address", then click the "Withdraw" button and the coins will be sent from the Pool to your Wallet
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws
Why use a Pool? As the network hash rises (as more miners are mining), it can take longer and longer to solve a block, by using the pool, everyone works together with all of their hash power to solve blocks, and the reward gets split between everyone who contributed based on how much they contributed in hash.
With solo mining (not using the pool) it may take 1 month to finally solve a block and get large BBP reward, with pool you can get small frequent BBP rewards every ~30 minutes. (BBP meaning BiblePay coins)

How to Update: Download exe from biblepay.org and install again, your wallet will stay intact

Backup:
Your wallet.dat stores your private keys that contain the access to your coins, this file is backed up every 24 hours in the backups folder, We also recommend that you save a copy of this file in other places, like a flash drive
Learn More about Backing Up your Wallet.dat https://www.reddit.com/BiblePay/comments/7lksp4/backup_walletdat/

FAQ
QUESTION: How long does it take for coins to mature? If you're solo mining, the coins become mature after ~100 blocks. If you're using the pool, they become mature after 24 hours
QUESTION: How do I know if I am currently mining? In your wallet >> In Top left Menu select "Tools" >> Click "Debug Console" Type in the command: getgenerate If it returns true, mining is turned on command: getmininginfo Will show how much "hashps" (hashing) your pc is doing, "genproclimit" will show how many mining threads you are using "poolmining" will be show value of true if you are successfully mining on the pool

How to Buy or Sell BBP coins?
You can buy and sell BBP coins for Bitcoin on the Exchanges we are listed on: SouthXChange: https://www.southxchange.com/Market/Book/BBP/BTC CoinExchange.io: https://www.coinexchange.io/market/BBP/BTC

Misc: Building headless Bitcoin and Bitcoin-qt on Windows https://bitcointalk.org/index.php?topic=149479.0 https://msdn.microsoft.com/en-us/commandline/wsl/install_guide https://en.wikipedia.org/wiki/Windows_Subsystem_for_Linux https://bitcointalk.org/index.php?topic=2388064.msg27133702#msg27133702 https://github.com/OleEichhorn/bitcoin-msvc

OUTDATED
Windows Mining Video Tutorial by copper101great https://www.youtube.com/watch?v=K1yKx8KsH60
submitted by togoshige to BiblePay [link] [comments]

Ravencoin Open Developer Meeting - 1/4/2019

[14:04] Hi everyone! [14:04] :dabbitwave: [14:04] Hey Everybody! [14:04] Hello 😃 [14:04] Sorry we're getting started a bit late. [14:04] Topics: SLC Meetup (March 15th) [14:04] 👋 [14:04] Roadmap breakdown - posted to github [14:05] IPFS (integration) [14:05] greetings 👋 [14:05] So, SLC Meetup on the 15th! [14:05] Great! [14:05] Hi! [14:06] Hi all — a special thanks to the developers and congratulations on an amazing first year!!! # [14:06] <[Dev] Blondfrogs> Hello Everyone! [14:07] We have a tentative agenda with @Tron , @corby speaking. [14:08] We would like to have nice walkthrough of the Raven DevKit for the meetup. [14:08] We are planning on hosting a meetup in SLC at the Overstock building on March 15th from 6:00pm-9:00pm. It is free admission, but there is a page on meetup.com where people can rsvp so that we have a somewhat accurate headcount for food. [14:08] sup guys [14:08] hey russ [14:09] We are planning on having a few speakers and have allotted a bit of time at the end for people to meet and greet each other. [14:09] can you guys link us to the page somewhere when thats available? 😄 [14:10] free food?! [14:10] todays topic? [14:10] yeah can we indicate pepperoni pizza [14:10] Sounds good to me @Jeroz Nothing ordered yet though. 😃 [14:10] only pepperoni pizza is served at true blockchain meetings right [14:10] :blobhide: [14:10] Absolutely. The itinerary just needs to be finalized and then I'll make a broad post about the rest of the details. [14:11] https://www.meetup.com/Salt-Lake-City-salt-lake-city-Meetup/ [14:11] 😭 so far away [14:11] West Coast! [14:11] @MTarget But there's pizza, so worth the travel time. [14:11] lol [14:12] I'll be watching the stream if its available since i'm from montreal/canada 😛 [14:12] Ah yes, I love $300 pizza 😉 [14:12] as long as I get to see your smiling faces @Tron @RavencoinDev then it's worth the time [14:12] We'll be there. [14:12] We'll be messaging additional details as they get finalized. [14:12] Greeting and salutations! [14:12] sup [14:13] Hey, $300 is considerably cheaper than 2 $3,700,000 pizzas. [14:14] Ok, switching topics... [14:14] yeah its a way to fly, [14:14] question is whether those piza's will be paid for in RVN coin or not :ThinkBlack: [14:14] Roadmap [14:14] It hasn't changed, just added some detail. [14:14] https://github.com/RavenProject/Ravencoin/tree/masteroadmap [14:15] nice [14:15] This now links to a breakdown for messaging, voting, anti-spam, and rewards (dividends) [14:15] will there be any additional RPC functionality coming in the future, thinking in terms of some functions that are only available in ravencore-lib [14:15] apologies if now is not time to ask questions, i can wait for later [14:15] "Phase 7 - Compatibility Mode" - that's new 😮 [14:15] The protocol for messaging is pretty well established, but the rest isn't in stone (code) yet. [14:16] can you give us details on compatibility mode? [14:16] In broad brush strokes. [14:17] The idea is to allow ravend to act as a daemon that looks like a single coin. [14:17] so ravend that only works with the bitcoin asset? [14:18] interesting [14:19] So you start it with an option to only work with a single asset/token account or something? [14:19] hmm compelling what is the reason for this? some kind of scale or performance? [14:19] ^ [14:19] Example: Configure ravend to listen for transfer RPC call for senttoaddress or sendfrom, but for a specific asset. This would allow easy integration into existing system for assets. [14:20] Only the daemon or the whole wallet UI? [14:20] yeah thats great, rpc functions dont allow us to do this yet, if i recall [14:20] or at least we depend more on ravencore lib [14:20] so like asset zmq [14:20] that's smart [14:20] @Tron it also sounds like it makes our life easier working with RPC, instead of core all the time for some functionality [14:21] if i understand correctly anyways [14:21] So you could run numerous instances of ravend each on their own network and RPC port, each configured for a different asset. You would need some balance of RVN in each one to cover transaction fees, then. [14:21] id be curious to know what all the advantages are of this [14:21] one more question, how would i decentralize the gateway between bitcoin mainnet/ravencoin mainnet? in the current RSK implementation they use a federated gateway, how would we avoid this? [14:21] it sounds neato [14:21] Just the daemon. The alternative is to get exchanges to adapt to our RPC calls for assets. It is easier if it just looks like Bitcoin, Litecoin or RVN to them, but it is really transferring FREE_HUGS [14:22] That makes sense. Should further increased exchange adoption for each asset. [14:22] hmm yeah its just easier for wallet integration because its basically the same as rvn and bitcoin but for a specific asset [14:22] so this is in specific mind of exchange listings for assets i guess [14:23] if i understand rightly [14:23] @traysi Gut feel is to allow ravend to handle a few different assets on different threads. [14:23] Are you going to call it kawmeleon mode? [14:23] Lol [14:23] I read that as kaw-melon mode. [14:24] same lol [14:24] so in one single swoop it possible to create a specific wallet and server daemon for specific assets. great. this makes it easier for exchanges, and has some added advantages with processing data too right? [14:24] Still keeping a RVN balance in the wallet, as well, Tron. How will that work is sendtoaddress sends the token instead of the RVN? A receive-RVN/send tokens-only wallet? [14:25] @traysi Yes [14:25] sendtoaddress on the other port (non RVN port) would send the asset. [14:25] This will be a hugely useful feature. [14:25] ^ [14:26] @Tron currently rpc function not support getaddresses senttowallet and this has to be done in ravencore lib, will this change you propose improve this situation [14:26] Config might look like {"port":2222, "asset":"FREE_HUGS", "rpcuser":"hugger", "rpcpass":"gi3afja33"} [14:26] how will this work cross-chain? [14:28] @push We'd have to go through the rpc calls and work out which ones are supported in compatibility mode. Obviously the mining ones don't apply. And some are generic like getinfo. [14:28] ok cool 👍 cheers [14:29] for now we continue using ravencore lib for our plans to keep track i just wondering if better way [14:29] as we had some issue after realising no rpc function for getting addresses of people who had sent rvn [14:29] @push | ravenland.org all of the node explorer and ravencore-lib functionality is based on RPC (including the addressindex-related calls). Nothing you can't do with RPC, although I'm not sure of the use cases you're referring to.. [14:29] interesting, so ravencore lib is using getrawtransaction somehow [14:29] i thought this may be the case [14:29] that is very useful thankyou for sharing this [14:30] look into addressindex flag and related RPC calls for functions that operate on addresses outside your wallet [14:30] thank you that is very useful, tbh i am not very skilled programmer so just decoding the hex at the raven-cli commandline was a challenge, i shall look more into this, valued information thanks as this was a big ? for us [14:31] Ok, things have gone quiet. New topic. [14:31] IPFS (integration) [14:31] GO [14:33] ... [14:33] <[Dev] Blondfrogs> So, we have been adding ipfs integration into the wallet for messaging. This will allow the wallets to do some pretty sweet stuff. For instance, you will be able to create your ipfs data file for issuing an asset. Push it to ipfs from the wallet, and add the hash right into the issuance data. This is going to allow for a much more seamless flow into the app. [14:34] <[Dev] Blondfrogs> This ofcourse, will also allow for users to create messages, and post them on ipfs and be able to easily and quickly format and send messages out on the network with ipfs data. [14:34] It will also allow optional meta-data with each transaction that goes in IPFS. [14:34] will i be able to view ipfs images natively in the wallet? [14:34] <[Dev] Blondfrogs> Images no [14:34] We discussed the option to disable all IPFS integration also. [14:35] @russ (kb: russkidooski) Probably not. There's some risk to being an image viewer for ANY data. [14:35] No option in wallet to opt into image viewing? [14:35] cool so drag and drop ipfs , if someone wanted to attach an object like an image or a file they could drag drop into ui and it create hash and attach string to transaction command parameters automatically [14:35] We could probably provide a link -- with a warning. [14:35] nomore going to globalupload.io [14:35] :ThinkBlack: [14:35] I understand that the wallet will rely on globalupload.io. (phase 1). Is it not dangerous to rely on an external network? Or am I missing something? [14:36] hmm [14:36] interesting, i suppose you could hash at two different endpoints and compare them [14:36] if you were that worried [14:36] and only submit one to the chain [14:36] You will be able to configure a URL that will be used as an IPFS browser. [14:36] Oh ic [14:36] you wont flood ipfs because only one hash per unique file [14:36] <[Dev] Blondfrogs> There are multiple options for ipfs integration. We are building it so you can run your own ipfs node locally. [14:36] <[Dev] Blondfrogs> or, point it to whatever service you would like. e.g. cloudflare [14:36] this is very cool developments, great to see this [14:37] Just like the external block explorer link currently in preferences. [14:37] @[Dev] Blondfrogs what about a native ipfs swarm for ravencoin only? [14:37] We have discussed that as an option. [14:37] @push | ravenland.org Considering having a fallback of upload through globalupload.io and download through cloudflare. [14:37] <[Dev] Blondfrogs> @russ (kb: russkidooski) We talked about that, but no decisions have been made yet. [14:37] yeah, i would just use two endpoints and strcompare the hash [14:37] as long as they agree good [14:37] submit tran [14:38] else 'potentially mysterious activity' [14:38] ? [14:38] if you submitted the file to ipfs api endpoints [14:38] Will the metadata just be a form with text only fields? [14:39] and then you would get 2 hashes, from 2 independent services [14:39] that way you would not be relying on a central hash service [14:39] and have some means of checking if a returned hash value was intercepted or transformed [14:39] i was answering jeroz' question [14:40] about relying on a single api endpoint for upload ipfs object [14:40] We have also kicked around the idea of hosting our own JSON only IPFS upload/browse service. [14:41] I have a service like this that is simple using php [14:41] we only use it for images right now [14:41] but fairly easy to do [14:41] Yup [14:42] Further questions about IPFS? [14:43] contract handling? file attach handling? or just text fields to generate json? [14:44] trying to get an idea of what the wallet will offer for attaching data [14:44] Probably just text fields that meet the meta-data spec. [14:44] ok noted [14:44] What do you mean by contract handling @sull [14:45] We won't prevent other hashes from being added. [14:45] asset contract (pdf etc) hash etc [14:45] <[Dev] Blondfrogs> also, being able to load from a file [14:45] got it, thanks [14:47] Let's do some general Q&A [14:48] Maybe just a heads up or something to look for in the future but as of right now, it takes roughly 12 hours to sync up the Qt-wallet from scratch. Did a clean installation on my linux PC last night. [14:48] Any plans or discussions related to lack of privacy of asset transfers and the ability to front run when sending to an exchange? [14:48] ^ [14:48] Is there a way to apply to help moderate for example the Telegram / Discord, i spend alot of time on both places, sometimes i pm mods if needed. [14:49] Any developed plans for Asset TX fee adjustment? [14:49] also this^ [14:49] @mxL86 We just created a card on the public board to look into that. [14:49] General remark: https://raven.wiki/wiki/Development#Phase_7_-_Compatible_Mode = updated reflecting Tron's explanation. [14:49] @mxL86 That's a great question. We need to do some profiling and speed it up. I do know that the fix we added from Bitcoin (that saved our bacon) slowed things down. [14:50] Adding to @mxL86 the sync times substantially increased coinciding with the asset layer activation. Please run some internal benchmarks and see where the daemon is wasting all its cycles on each block. We should be able to handle dozens per second but it takes a couple seconds per block. [14:50] @BW__ no plans currently for zk proofs or anything if that's what you're asking [14:50] You are doing a great job. Is there a plan that all this things (IPFS) could be some day implemented in mobile wallet? Or just in QT? [14:50] i notice also that asset transactions had some effect on sync time as we were making a few. Some spikes i not analysed the io and cpu activity properly but will if there is interest [14:51] we are testing some stuff so run into things i am happy to share [14:51] @BW__ Might look at Grin and Beam to see if we can integrate Mimble Wimble -- down the road. [14:51] yeees [14:51] @J. | ravenland.org work with the telegram mods. Not something the developers handle. [14:51] i love you [14:51] @J. | ravenland.org That would be best brought up with the operators/mods of teh telegram channel. [14:51] @corby @Tron thnx [14:51] @S1LVA | GetRavencoin.org we're planning on bumping fees to... something higher! [14:51] no catastrophic failures, just some transaction too smals, and mempool issues so far, still learning [14:52] @corby i thought that this may happen :ThinkBlack: [14:52] @corby x10? 100x? 1000x? Ballpark? [14:52] Definitely ballpark. [14:52] 😃 [14:52] 😂 [14:52] Is a ballpark like a googolplex? [14:53] @push | ravenland.org asset transactions are definitely more expensive to sync [14:53] yes yes they are [14:53] they are also more expensive to make i believe [14:53] 10,000x! [14:53] as some sync process seems to occur before they are done [14:53] @traysi ★★★★★ thanks for the suggestions we are going to be looking at optimizations [14:53] But, it is way slower than we like. Going to look into it. [14:53] i do not understand fully its operation [14:53] 1000x at minimum in my opinion [14:53] its too easy to spam the network [14:54] yes there has been some reports of ahem spam lately [14:54] :blobhide: [14:54] 😉 [14:54] cough cough ravenland [14:54] @russ (kb: russkidooski) we're in agreement -- it's too low [14:54] default fee 0.001 [14:54] ^ something around here [14:54] @corby yep we all are i think [14:55] waaay too low [14:55] meaningful transactions start with meaningful capital expense [14:55] though there is another scenario , there are some larger volume, more objective rich use cases of the chain that would suffer considerably from that [14:55] just worth mentioning, as i have beeen thinking about this a lot [14:55] there are some way around, like i could add 1000 ipfs hashes to a single unique entity, i tested this and it does work [14:56] @russ (kb: russkidooski) What would you suggest. [14:57] I had a PR for fee increase and push back. [14:57] Ignore the push back. 0.001 RVN is not even a micro-farthing in fiat terms [14:57] definitely around 1000x [14:57] Vocal minority for sure [14:57] ^ yep [14:57] @russ (kb: russkidooski) That sounds reasonable. [14:57] Couple hundred Fentons [14:58] right now an asset transaction is 0.01 of a penny essentially [14:58] 1 RVN would work now, but not when RVN is over $1. [14:58] yes exactly [14:58] Hi. Late to the party. [14:58] We are also talking about a min fee. The system will auto-adapt if blocks fill up. [14:58] im thinking tron, some heavy transaction use cases would fall out of utility use if that happened [14:58] so whats the thinking there [14:59] is there a way around the problem, bulked ipfs hash transactions? [14:59] 1000x would put us around btc levels [14:59] maybe a minimum 500x? [14:59] @russ (kb: russkidooski) Agreed. [14:59] <[Dev] Blondfrogs> It is time to wrap it up here. Everyone. Thank you all for your questions and thoughts. We will be back in 2 weeks. 😃 [14:59] Small increase and review. [14:59] Thanks all! [14:59] Cheers. [15:00] yeah sorry for 1 million questions guys hope i didnt take up too much time [15:00] cheers all 👍 [15:00] Thanks everyone [15:00] Thanks everyone for participating!!! [15:00] That is what we are here for [15:00] 100x-500x increase, 1000x maximum [15:00] 🍺

submitted by Chatturga to Ravencoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Can anybody help me understand where are my funds?

Hi all,
a few months ago I opened a lightning network node on the main net, opened three channels and fund each one of them with 100000 sat.
Now I want to withdraw these funds so I went to check the node, I found the three channels closed and no funds.
Can anybody help me understand what happened in this period to the node and the channels and where are the funds?
https://1ml.com/node/02267f6f4dbedb8bd75b81b4595dea2752a383b0d808b4fa0d2122b83b28f33ae9
getinfo
{ "id" : "02267f6f4dbedb8bd75b81b4595dea2752a383b0d808b4fa0d2122b83b28f33ae9", "port" : 9735, "address" :
[
{ "type" : "ipv4", "address" : "5.135.156.14", "port" : 9735 } ], "version" : "v0.5.2-2016-11-21-2491-ga1cf789", "blockheight" : 53883, "network" : "bitcoin" }

listfunds
{ "outputs" :
[
{ "txid" : "c9c29c3eb806ae22f00ad4bf0df8e3a61ddf589c73e843e5672793e8d6a486a7", "output" : 0, "value" : 99515, "address" : "bc1qr0df0htdjfx7v6j4rnvzk3mzu6n4z0eewqa5yh", "status" : "unconfirmed" } ], "channels" :
[
{ "peer_id" : "02f6725f9c1c40333b67faea92fd211c183050f28df32cac3f9d69685fe9665432", "short_channel_id" : "517209:1102:0", "channel_sat" : 100000, "channel_total_sat" : 100000, "funding_txid" : "a9a1931c4d6bdb2cab504077d428f3874f22d666aa3f317265db78017169ddfd" },
{ "peer_id" : "02ad6fb8d693dc1e4569bcedefadf5f72a931ae027dc0f0c544b34c1c6f3b9a02b", "short_channel_id" : "517209:1103:0", "channel_sat" : 100000, "channel_total_sat" : 100000, "funding_txid" : "25aa675b4704c92de36cbd3db41f88f6dc568f97adab8a63a9f22e85791a7674" },
{ "peer_id" : "02d246c519845e7b23b02684d64ca23b750958e0307f9519849ee2535e3637999a", "short_channel_id" : "517209:1104:1", "channel_sat" : 100000, "channel_total_sat" : 100000, "funding_txid" : "c9c29c3eb806ae22f00ad4bf0df8e3a61ddf589c73e843e5672793e8d6a486a7" } ] }

Thanks
submitted by lorenzoprimi to lightningnetwork [link] [comments]

WIP: Blackpi - a stake device based on raspberry

Warning: This is a WiP and it's using Blackcoin Lore which is still in beta. Please be aware of that and backup your wallet.dat before you put any real values in this!
UPDATES
29.12.2017
22.06.2017
I am currently trying to set up blackoin on raspberry. Community members asked for a tutorial to compile it, so I will start with this here. Maybe in the future it would even be possible to turn it into a headless (=without screen and keyboard) image to put on an SD card and just boot up the wallet.
I used the latest Blackcoin Lore by janko33 for this process, however it should be quite the same with the "original" core wallet by rat4/johndolittle. Blackcoin Lore is not deemed as stable as it is still in beta, so it's up to you what source tree you take.
Please be also aware, that compiling on a small computer like raspi can take a while. Please also note that Lore is still in beta. The names in the archive are still "bitcoin". There is an update comming where the naming is correct and also maybe a few bugfixes.
** Tutorial: **
You first need to get raspbian. The lite image will work, it's a small version of the operating system without a graphical interface, so you will need ssh to operate it. The image is 294 MB but you will want to have a bigger card. 2GB is certainly too small, better get 16 or even 32GB - you also will need space for the blockchain!
To install it I followed this guide
https://hackernoon.com/raspberry-pi-headless-install-462ccabd75d0
Get the raspdian image file from:
https://www.raspberrypi.org/downloads/raspbian/
Also get Etcher from
https://etcher.io/
Etcher is a tool to write img files to an SD card/USB-stick.
After writing, open the card in your explorer and add a file "ssh". The file sould be empty and just be called "ssh" (not ssh.txt or something). It will tell raspi to activate ssh on boot.
Then boot up your raspi with the card and plug it into your network. Consult your router's LAN-page to find the device, it should register to your router as "raspberry" or so. Open up Putty and login to your raspi using pi as username and raspberry as password.
After login you can configure your raspi, please read the guide linked above for more details.
Note: One important thing that you should configure is your timezone! Use
sudo raspi-config 
Go to 4. Localisation Options and set the time to your timezone. If your time is way off, you would get troubles with staking, so make sure you always have the time set right!
After you got everything set up, get the build environment ready:
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils #Installs alot and can take a while git clone -b Blackcoin-Lore https://github.com/janko33bd/bitcoin Blackcoin-Lore cd Blackcoin-Lore cd depends make -j 6 HOST=arm-linux-gnueabihf cd .. ./autogen.sh ./configure --prefix=`pwd`/depends/arm-linux-gnueabihf 
# note: ` = is a "backtick" not an apostroph. It causes the outpupt of "pwd" being inserted there
make -j 6 # -j n tells the compiler to use more cores, speeds that up a little (n = 1.5*cores installed) sudo make install 
This should compile so far. Update: Lore does not need Berkeley DB 4.8 to be installed, so just go with the DB provided by the repository works (libdb++-dev). (Thanks patcrypt)
After compile you can run the wallet with
lored 
And after it synced you have bitcoin-cli to control the wallet.
Issue: Synching blocks takes an awfully long time on raspi for some reason, even with Lore (that syncs blocks in a few hours instead of a whole day on a normal computer). If anyone knows how to speed up that process, please let us know!
This thread is a WiP. Please post all issues and errors here, I will then edit the OP to make it into a real, working tutorial.
On a note it was mentioned, that using an USB-stick here instead of a card would make sense since the cards are more prone to failure than USB-sticks. I will include setting it up on USB in a later version of this tutorial.
Some tips and tricks
Since compiling takes a longer time, it is recommented to run it in the console in a screen. Screen is a terminal tool that supports multiple windows in the same shell and, most important, detaches when your ssh connection breaks. Using screen you can simply reconnect and use screen -r to attach to your running shell again. To use screen, you need to install and then start it before you start the whole build process within a screen-shell.
sudo apt-get install screen screen #Start install/build process here #Type [ctrl-a] [d] to detach from the screen and put it in the background #After reconnect type screen -r to jump back into your running shell 
If you want to see your blocks being processed while the wallet syncs to the network, use the following command on a second shell (new Putty instance or screen window which you can open in screen with [ctrl-a] [c] (hit [ctrl-a] [n] to cycle through the windows in screen)
watch -n 5 lore-cli getinfo #This will execute the command "bitcoin-cli getinfo" every 5 seconds and thus display live update of your wallet info 
How to use that thing?
Here are a few helpful CLI commands, call them with lore-cli
help - Returns available commands help  - Returns detailed help to a  getinfo - Returns a descriptive information of your wallet, including balance getwalletinfo - Returns short information about your wallet, including balance, unconfirmed balance, immature balance, number of tx ect getaccountaddress 'raspi' - Returns an address for your wallet. If the account does not need to exist, it will be created with new address sendtoaddress   - Sends  to  sendtoaddress   substractfeefromaccount - Sends  minus tx fee to  getnewaddress  - Returns a new address for  each time you call the command.  is optional 
Further plans for this tutorial/project
Have fun!
Donations: B4nn2Y3SFC6whNGNvcQ2MvV1aQbZp3cZVF
submitted by mindphuk to blackcoin [link] [comments]

From my local P2Pool: p2pool.util.jsonrpc.NarrowError: -32601 Method not found

I've run my own local P2Pool server for well over a year now. I had to upgrade everything because of recent changes to the BTC protocol and etc. But that's the last error it keeps throwing. And then it spits out the following over and over and over again...
Error while checking Bitcoin connection: Traceback (most recent call last): File "/uslib/python2.7/dist-packages/twisted/internet/defer.py", line 651, in _runCallbacks current.result = callback(current.result, *args, **kw) File "/uslib/python2.7/dist-packages/twisted/internet/defer.py", line 1355, in gotResult _inlineCallbacks(r, g, deferred) File "/uslib/python2.7/dist-packages/twisted/internet/defer.py", line 1297, in _inlineCallbacks result = result.throwExceptionIntoGenerator(g) File "/uslib/python2.7/dist-packages/twisted/python/failure.py", line 389, in throwExceptionIntoGenerator return g.throw(self.type, self.value, self.tb) ---  --- File "/home/lunacy/p2pool/p2pool/util/deferral.py", line 41, in f result = yield func(*args, **kwargs) File "/uslib/python2.7/dist-packages/twisted/internet/defer.py", line 1297, in _inlineCallbacks result = result.throwExceptionIntoGenerator(g) File "/uslib/python2.7/dist-packages/twisted/python/failure.py", line 389, in throwExceptionIntoGenerator return g.throw(self.type, self.value, self.tb) File "/home/lunacy/p2pool/p2pool/bitcoin/helper.py", line 13, in check if not (yield net.PARENT.RPC_CHECK(bitcoind)): File "/uslib/python2.7/dist-packages/twisted/internet/defer.py", line 1297, in _inlineCallbacks result = result.throwExceptionIntoGenerator(g) File "/uslib/python2.7/dist-packages/twisted/python/failure.py", line 389, in throwExceptionIntoGenerator return g.throw(self.type, self.value, self.tb) File "/home/lunacy/p2pool/p2pool/bitcoin/networks/bitcoin.py", line 16, in  not (yield bitcoind.rpc_getinfo())['testnet'] File "/uslib/python2.7/dist-packages/twisted/internet/defer.py", line 1297, in _inlineCallbacks result = result.throwExceptionIntoGenerator(g) File "/uslib/python2.7/dist-packages/twisted/python/failure.py", line 389, in throwExceptionIntoGenerator return g.throw(self.type, self.value, self.tb) File "/home/lunacy/p2pool/p2pool/util/jsonrpc.py", line 133, in _http_do raise Error_for_code(resp['error']['code'])(resp['error']['message'], resp['error'].get('data', None)) p2pool.util.jsonrpc.NarrowError: -32601 Method not found 
And yeah wow what a mess. That was the cleanest I could get it too... :|
submitted by 1unacy to BitcoinMining [link] [comments]

Emercoin 0.5.2 Release available!

What's new:
1) Merged with bitcoin 0.10.4. This allows to create transactions that cannot be spent until certain time/height;
2) QT and CLI now has unicode support by default (Univalue lib). This will display Unicode symbols in name value, but please note: do not use it for binary data;
3) RPC can also enable unicode, but you need to specify "-legacyrpc=0" in your emercoin.conf;
4) Name commands now have parameter for binary input/output as a hex or base64 encoded strings;
5) Some minor bugfixes (emercoin-cli could crash client during client startup);
6) More info about wallet lock state in getinfo ("encrypted": true, "mintonly": true);
7) Added ENUM support (http://www.voip-info.org/wiki/view/ENUM).
submitted by EmerCoin to EmerCoin [link] [comments]

In the event of a transaction spam attack, defend your node

I'm sure most of you know that Coinwallet.eu plans to spam the network in September.
They will be generating 20 new transactions every second. With each transaction about 3KB in size this will quickly start to create transaction backlog, and node's mempool to grow (20tx * 3KB * 60seconds=3600KB per minute, or 36MB per 10 minutes).
Attacker will be paying a fee of 0.0001 btc per transaction, that's 0.00003333 btc per KB. Default relay policy (threshold) in clients v0.10 and v0.11 is 0.00001000 btc per KB, but there is a command line and config option to alter this: minrelaytxfee, and limitfreerelay:
To defend your node's resources if under a spam attack, alter this defaults by adding options into bitcoin.conf and restarting the client (or starting the client with command line options). Like:
minrelaytxfee=0.00005 limitfreerelay=5 
To make sure these settings have taken effect, in the debug console type: "getinfo" and check the values.
submitted by ujka to bitcoinxt [link] [comments]

Where is the rest of my BTC balance? :(

Hey all, i have a problem with my bitcoin-cli and really hope someone can help me. When i type getinfo i get the balance of 0.41301282 but then i type listaccounts there are two accounts with value 0.01209894 and 0.24184251. So where are the other bitcoins? :/
submitted by tiCeR89 to btc [link] [comments]

[P2pool] How to make your own personal p2pool Node!

Tired of getting no block rewards and sending many dead shares? Need a p2pool node close to your miner? MAKE YOUR OWN! :D
And, Yep, P2pools give 0.5% Rewards to block finders!
Here's some info about p2ools: http://whatisp2pool.com/
The stronger the P2Pool network becomes the more resistant the digibyte network is to 51% attacks!
Oh and, P2pools are DDOS proof! Now that's News! So if your node gets DDOS'd .. you dont lose your shares as the shares have been saved in the p2pool, its called the sharechain. So you get paid anyhow! Thanks to the p2pool network. and you ccan set your workers to another pool using the "--failover only" command in cgminer (if im not wrong) and get it back to work on the p2pool network!
TL;DR; P2POOL = 1 Big fat network Decentrazlized pool!
STEPS TO MAKE A P2POOL:
Install Ubuntu server or Desktop if you want http://www.ubuntu.com/download/ or u can use a VPS (VirtualPrivateServer -- Link Below with coupon code)
So Let's start off in the command line (Open Terminal.. and all you have to do is Cut, Copy Paste! ;) )
Start by updating and upgrading Ubuntu, you know you want the best ;)
sudo apt-get update sudo apt-get upgrade sudo apt-get install python-software-properties sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update 
Time for the DigiByteProject dependencies!
sudo apt-get install build-essential libboost-all-dev libcurl4-openssl-dev libdb5.1-dev libdb5.1++-dev git qt-sdk libminiupnpc-dev sudo apt-get install qrencode libqrencode-dev 
And, Now to compile DigiByte on your system!
git clone git://github.com/digibyte/DigiByteProject.git digibyte #renaming makes it easier ;) cd ~/digibyte/src mkdir obj make -f makefile.unix USE_UPNP=- sudo cp digibyted /usbin cd ~ 
After it has compiled try running 'digibyted'
./digibyte/src/digibyted 
If you get an error saying you need to make the digibyte.conf file, good! :) If it doesnt give you that error, make sure you followed the compiling steps appropriately.
So, Lets create the conf file here...
cd .digibyte #edited from 'digibyted' .. fixed!! nano digibyte.conf 
Paste the following, CHANGING THE USERNAME AND PASS!! make sure to take note of both, you'll need these later!
rpcuser=CHANGEusername rpcpassword=ChangePassword daemon=1 server=1 rpcport=14022 port=12024 gen=1 rpcallowip=127.0.0.1 addnode=74.208.230.160 addnode=31.220.25.91 addnode=184.155.218.183 addnode=24.119.23.61 addnode=70.196.193.231 addnode=198.98.118.241 addnode=142.4.204.115 addnode=23.90.191.58 addnode=216.250.125.121 addnode=115.28.31.25 addnode=83.172.105.46 
Press 'CTRL' + ' X', and then 'Y' to save when prompted
cd ~ ./digibyte/src/digibyted ./digibyte/src/digibyted getinfo 
Make sure you check the latest block in the block chain or on your local DigiByte Wallets. This is to see how far your p2pool node has gotten! This is gonna take quite a while so lets CONTINUE!
Let's get the p2pool software and frontend in! Install the p2pool dependencies!
sudo apt-get install python-zope.interface python-twisted python-twisted-web git clone https://github.com/Rav3nPL/p2pool-rav p2pool #renaming it! cd ~/p2pool/digibyte_subsidy #Thanks to Chaeplin sudo python setup.py install 
Time to edit and customise the html code to personalise your p2pool's frontend. Feel free to change the p2pool name and if you're an advanced user, feel free to add your own frontend from git hub after removing the web-static folder. (OPTIONAL: by using rm -f -r web-static #in that directory. And then you can choose whichever frontend you want! by cloning it in the web-static folder)
Editing the current frontend html!
cd .. cd web-static nano index.html 
After personalising the page, i.e. changing the p2pool name and adding some info! Lets go back and check how far the block downloading has gotten! You can check this by typing this in the command line after going back to the root directory:
cd ~ ./digibyte/src/digibyted getinfo 
This is gonna take a while so might as well check for updates again :P
sudo apt-get update sudo apt-get upgrade 
After making sure that all the blocks have been synced locally! We're ready to run the p2pool node! Simply enter the string below in the command line, entering your USERNAME and PASS that you saved earlier!
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 
If you want to charge a fee for your node add this to your string, adding your fee address!:
--fee 1.0 --address NEWDGBADDRESS 
To see if the node is up and running enter this in the command line:
screen -x myp2pool 
'CTRL' + 'A' + 'D' to close the terminal if you press 'CTRL' + 'C', it will terminate the p2pool program and you'll have to restart the pool by using the string above!
Once, Everything is setup as planned! Check your p2pool node's ip Address by entering this into the command line:
ifconfig 
inet addr: 192.168.1.1 #You'll see a line like this.
So, Your cgminer string should look something like this:
cgminer --scrypt -o 192.168.1.1:9022 -u DGBADDRESS -p x
And your p2pool WEB ADDRESS should look like this:
192.168.1.1:9022
example: http://192.168.1.1:9022/
You can monitor your p2pool using that web address! Enjoy, your personal p2pool node!! :D
If for whatever reason the server shuts off and you need to restart the p2pool node, you should run digibyted again and after it has synced successfully, just type in your p2pool string:
./digibyte/src/digibyted
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 --fee 1.0 --address NEWADDRESS
PRESS CTRL + A + D to Detach from screen
UPDATE Follow Guide below if you used this guide before DigibByte v2.0 was released (28th Feb 2014)
You must check whether you're on the right ShareChain. Make Sure the block Value says 7960!
https://bitcointalk.org/index.php?topic=408268.msg5440858#msg5440858
This Tutorial was made with the help of an existing Guide: http://doges.org/index.php?topic=5586.0 Kudos to crypto49er!
If you want to do this on a VPS:
Here's a link to a VPS hosting site:
https://www.digitalocean.com/
Feel free to use my $10 ref. code -- it doesnt really make a difference, though.
https://www.digitalocean.com/?refcode=dc909c442664
Let me know if this guide helped!
submitted by StormMiner to Digibyte [link] [comments]

0.00000000 balance after three days of CPU mining?

I'm trying to figure out how to handle the console based binaries, and i'm still confused. I'm CPU mining with a machine thats pretty much doing nothing else. Here are some stats:
./bitcoind getinfo { "version" : 32100, "balance" : 0.00000000, "blocks" : 125344, "connections" : 8, "proxy" : "", "generate" : true, "genproclimit" : -1, "difficulty" : 244139.48158254, "hashespersec" : 6138402, "testnet" : false, "keypoololdest" : 1305150600, "paytxfee" : 0.00000000, "errors" : "" } fgrep -i hashmeter debug.log 05/20/11 17:23 hashmeter 4 CPUs 6127 khash/s 05/20/11 17:53 hashmeter 4 CPUs 6175 khash/s 05/20/11 18:23 hashmeter 4 CPUs 6150 khash/s 
Is the miner really running? Shouldn't the balance value adjust slighty? I know it will probably take a long time to get one bitcoin but i'm just trying to find out how it works.
submitted by truthseekr to Bitcoin [link] [comments]

Just posting to share my excitement in setting up my first bitcoin-handling web server.

After learning a lot about Linux server administration at my summer internship, I've successfully configured the old computer in my room (which I'd prior turned into a server) to run bitcoin with the JSON-RCP PHP framework.
This excites me not only from a proponent of bitcoin's perspective, but also just as a general web developer because of how great of a stride it's been since even only a few months ago for me. I would like to use this new capability to tinker with the framework and see what sort of web applications I can contribute to the bitcoin community.
This isn't nearly as impressive as the mining rigs some of you have, but my main goal isn't mining. I hope to contribute to bitcoin's value by introducing more applications for it.
Does anyone have any tips for me from here? I've pretty much just echo'd getinfo() so far, and it seems pretty straightforward from here to scale to complex applications. I plan on reading the proper money handling guide, as well.
submitted by mikesername to Bitcoin [link] [comments]

Just started mining tonight!

I just downloaded all the software, installed the client, and fired up poclbm. I'm running an nVidi 470 on Windows 7 on an i7 processor. It's been running for almost a half an hour, and I want to go to sleep, but I'm not sure that everything is hooked up right. I'm getting around 81,442 khash/s but nothing has shown up in my wallet when I hit namecoind getinfo. I know that I have to wait for a full block of 50 namecoins to hit, but how do I know that everything is connected right before I get that "hit?" I don't want to run this machine all night just find out in the morning that I made a mistake in the settings somewhere and decoded a bunch of namecoins that went into the trash or the ether or something. Is there any way for me to confirm that everything is working properly before I get coins?
edit: Joined the bitparking pool. Left her running overnight and got 1.2 namecoins. I'm getting alot of these, however:
16/06/2011 06:10:47, long poll exception:
Traceback (most recent call last):
File "BitcoinMiner.pyo", line 261, in longPollThread
File "BitcoinMiner.pyo", line 236, in request
File "json_init_.pyo", line 307, in loads
File "json\decoder.pyo", line 319, in decode
File "json\decoder.pyo", line 338, in raw_decode
ValueError: No JSON object could be decoded
Is this normal? I'm seeing this once for every four or five accepted shares.
submitted by MonkeyDeathCar to Namecoin [link] [comments]

Bitcoin Core 0.10.0 released | Wladimir | Feb 16 2015

Wladimir on Feb 16 2015:
Bitcoin Core version 0.10.0 is now available from:
https://bitcoin.org/bin/0.10.0/
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues
The whole distribution is also available as torrent:
https://bitcoin.org/bin/0.10.0/bitcoin-0.10.0.torrent
magnet:?xt=urn:btih:170c61fe09dafecfbb97cb4dccd32173383f4e68&dn;=0.10.0&tr;=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969&tr;=udp%3A%2F%2Fopen.demonii.com%3A1337&ws;=https%3A%2F%2Fbitcoin.org%2Fbin%2F
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrading warning
Because release 0.10.0 makes use of headers-first synchronization and parallel
block download (see further), the block files and databases are not
backwards-compatible with older versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.
Notable changes

Faster synchronization
Bitcoin Core now uses 'headers-first synchronization'. This means that we first
ask peers for block headers (a total of 27 megabytes, as of December 2014) and
validate those. In a second stage, when the headers have been discovered, we
download the blocks. However, as we already know about the whole chain in
advance, the blocks can be downloaded in parallel from all available peers.
In practice, this means a much faster and more robust synchronization. On
recent hardware with a decent network link, it can be as little as 3 hours
for an initial full synchronization. You may notice a slower progress in the
very first few minutes, when headers are still being fetched and verified, but
it should gain speed afterwards.
A few RPCs were added/updated as a result of this:
  • getblockchaininfo now returns the number of validated headers in addition to
the number of validated blocks.
  • getpeerinfo lists both the number of blocks and headers we know we have in
common with each peer. While synchronizing, the heights of the blocks that we
have requested from peers (but haven't received yet) are also listed as
'inflight'.
  • A new RPC getchaintips lists all known branches of the block chain,
including those we only have headers for.
Transaction fee changes
This release automatically estimates how high a transaction fee (or how
high a priority) transactions require to be confirmed quickly. The default
settings will create transactions that confirm quickly; see the new
'txconfirmtarget' setting to control the tradeoff between fees and
confirmation times. Fees are added by default unless the 'sendfreetransactions'
setting is enabled.
Prior releases used hard-coded fees (and priorities), and would
sometimes create transactions that took a very long time to confirm.
Statistics used to estimate fees and priorities are saved in the
data directory in the fee_estimates.dat file just before
program shutdown, and are read in at startup.
New command line options for transaction fee changes:
  • -txconfirmtarget=n : create transactions that have enough fees (or priority)
so they are likely to begin confirmation within n blocks (default: 1). This setting
is over-ridden by the -paytxfee option.
  • -sendfreetransactions : Send transactions as zero-fee transactions if possible
(default: 0)
New RPC commands for fee estimation:
  • estimatefee nblocks : Returns approximate fee-per-1,000-bytes needed for
a transaction to begin confirmation within nblocks. Returns -1 if not enough
transactions have been observed to compute a good estimate.
  • estimatepriority nblocks : Returns approximate priority needed for
a zero-fee transaction to begin confirmation within nblocks. Returns -1 if not
enough free transactions have been observed to compute a good
estimate.
RPC access control changes
Subnet matching for the purpose of access control is now done
by matching the binary network address, instead of with string wildcard matching.
For the user this means that -rpcallowip takes a subnet specification, which can be
  • a single IP address (e.g. 1.2.3.4 or fe80::0012:3456:789a:bcde)
  • a network/CIDR (e.g. 1.2.3.0/24 or fe80::0000/64)
  • a network/netmask (e.g. 1.2.3.4/255.255.255.0 or fe80::0012:3456:789a:bcde/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff)
An arbitrary number of -rpcallow arguments can be given. An incoming connection will be accepted if its origin address
matches one of them.
For example:
| 0.9.x and before | 0.10.x |
|--------------------------------------------|---------------------------------------|
| -rpcallowip=192.168.1.1 | -rpcallowip=192.168.1.1 (unchanged) |
| -rpcallowip=192.168.1.* | -rpcallowip=192.168.1.0/24 |
| -rpcallowip=192.168.* | -rpcallowip=192.168.0.0/16 |
| -rpcallowip=* (dangerous!) | -rpcallowip=::/0 (still dangerous!) |
Using wildcards will result in the rule being rejected with the following error in debug.log:
 Error: Invalid -rpcallowip subnet specification: *. Valid are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). 
REST interface
A new HTTP API is exposed when running with the -rest flag, which allows
unauthenticated access to public node data.
It is served on the same port as RPC, but does not need a password, and uses
plain HTTP instead of JSON-RPC.
Assuming a local RPC server running on port 8332, it is possible to request:
In every case, EXT can be bin (for raw binary data), hex (for hex-encoded
binary) or json.
For more details, see the doc/REST-interface.md document in the repository.
RPC Server "Warm-Up" Mode
The RPC server is started earlier now, before most of the expensive
intialisations like loading the block index. It is available now almost
immediately after starting the process. However, until all initialisations
are done, it always returns an immediate error with code -28 to all calls.
This new behaviour can be useful for clients to know that a server is already
started and will be available soon (for instance, so that they do not
have to start it themselves).
Improved signing security
For 0.10 the security of signing against unusual attacks has been
improved by making the signatures constant time and deterministic.
This change is a result of switching signing to use libsecp256k1
instead of OpenSSL. Libsecp256k1 is a cryptographic library
optimized for the curve Bitcoin uses which was created by Bitcoin
Core developer Pieter Wuille.
There exist attacks[1] against most ECC implementations where an
attacker on shared virtual machine hardware could extract a private
key if they could cause a target to sign using the same key hundreds
of times. While using shared hosts and reusing keys are inadvisable
for other reasons, it's a better practice to avoid the exposure.
OpenSSL has code in their source repository for derandomization
and reduction in timing leaks that we've eagerly wanted to use for a
long time, but this functionality has still not made its
way into a released version of OpenSSL. Libsecp256k1 achieves
significantly stronger protection: As far as we're aware this is
the only deployed implementation of constant time signing for
the curve Bitcoin uses and we have reason to believe that
libsecp256k1 is better tested and more thoroughly reviewed
than the implementation in OpenSSL.
[1] https://eprint.iacr.org/2014/161.pdf
Watch-only wallet support
The wallet can now track transactions to and from wallets for which you know
all addresses (or scripts), even without the private keys.
This can be used to track payments without needing the private keys online on a
possibly vulnerable system. In addition, it can help for (manual) construction
of multisig transactions where you are only one of the signers.
One new RPC, importaddress, is added which functions similarly to
importprivkey, but instead takes an address or script (in hexadecimal) as
argument. After using it, outputs credited to this address or script are
considered to be received, and transactions consuming these outputs will be
considered to be sent.
The following RPCs have optional support for watch-only:
getbalance, listreceivedbyaddress, listreceivedbyaccount,
listtransactions, listaccounts, listsinceblock, gettransaction. See the
RPC documentation for those methods for more information.
Compared to using getrawtransaction, this mechanism does not require
-txindex, scales better, integrates better with the wallet, and is compatible
with future block chain pruning functionality. It does mean that all relevant
addresses need to added to the wallet before the payment, though.
Consensus library
Starting from 0.10.0, the Bitcoin Core distribution includes a consensus library.
The purpose of this library is to make the verification functionality that is
critical to Bitcoin's consensus available to other applications, e.g. to language
bindings such as [python-bitcoinlib](https://pypi.python.org/pypi/python-bitcoinlib) or
alternative node implementations.
This library is called libbitcoinconsensus.so (or, .dll for Windows).
Its interface is defined in the C header [bitcoinconsensus.h](https://github.com/bitcoin/bitcoin/blob/0.10/src/script/bitcoinconsensus.h).
In its initial version the API includes two functions:
  • bitcoinconsensus_verify_script verifies a script. It returns whether the indicated input of the provided serialized transaction
correctly spends the passed scriptPubKey under additional constraints indicated by flags
  • bitcoinconsensus_version returns the API version, currently at an experimental 0
The functionality is planned to be extended to e.g. UTXO management in upcoming releases, but the interface
for existing methods should remain stable.
Standard script rules relaxed for P2SH addresses
The IsStandard() rules have been almost completely removed for P2SH
redemption scripts, allowing applications to make use of any valid
script type, such as "n-of-m OR y", hash-locked oracle addresses, etc.
While the Bitcoin protocol has always supported these types of script,
actually using them on mainnet has been previously inconvenient as
standard Bitcoin Core nodes wouldn't relay them to miners, nor would
most miners include them in blocks they mined.
bitcoin-tx
It has been observed that many of the RPC functions offered by bitcoind are
"pure functions", and operate independently of the bitcoind wallet. This
included many of the RPC "raw transaction" API functions, such as
createrawtransaction.
bitcoin-tx is a newly introduced command line utility designed to enable easy
manipulation of bitcoin transactions. A summary of its operation may be
obtained via "bitcoin-tx --help" Transactions may be created or signed in a
manner similar to the RPC raw tx API. Transactions may be updated, deleting
inputs or outputs, or appending new inputs and outputs. Custom scripts may be
easily composed using a simple text notation, borrowed from the bitcoin test
suite.
This tool may be used for experimenting with new transaction types, signing
multi-party transactions, and many other uses. Long term, the goal is to
deprecate and remove "pure function" RPC API calls, as those do not require a
server round-trip to execute.
Other utilities "bitcoin-key" and "bitcoin-script" have been proposed, making
key and script operations easily accessible via command line.
Mining and relay policy enhancements
Bitcoin Core's block templates are now for version 3 blocks only, and any mining
software relying on its getblocktemplate must be updated in parallel to use
libblkmaker either version 0.4.2 or any version from 0.5.1 onward.
If you are solo mining, this will affect you the moment you upgrade Bitcoin
Core, which must be done prior to BIP66 achieving its 951/1001 status.
If you are mining with the stratum mining protocol: this does not affect you.
If you are mining with the getblocktemplate protocol to a pool: this will affect
you at the pool operator's discretion, which must be no later than BIP66
achieving its 951/1001 status.
The prioritisetransaction RPC method has been added to enable miners to
manipulate the priority of transactions on an individual basis.
Bitcoin Core now supports BIP 22 long polling, so mining software can be
notified immediately of new templates rather than having to poll periodically.
Support for BIP 23 block proposals is now available in Bitcoin Core's
getblocktemplate method. This enables miners to check the basic validity of
their next block before expending work on it, reducing risks of accidental
hardforks or mining invalid blocks.
Two new options to control mining policy:
  • -datacarrier=0/1 : Relay and mine "data carrier" (OP_RETURN) transactions
if this is 1.
  • -datacarriersize=n : Maximum size, in bytes, we consider acceptable for
"data carrier" outputs.
The relay policy has changed to more properly implement the desired behavior of not
relaying free (or very low fee) transactions unless they have a priority above the
AllowFreeThreshold(), in which case they are relayed subject to the rate limiter.
BIP 66: strict DER encoding for signatures
Bitcoin Core 0.10 implements BIP 66, which introduces block version 3, and a new
consensus rule, which prohibits non-DER signatures. Such transactions have been
non-standard since Bitcoin v0.8.0 (released in February 2013), but were
technically still permitted inside blocks.
This change breaks the dependency on OpenSSL's signature parsing, and is
required if implementations would want to remove all of OpenSSL from the
consensus code.
The same miner-voting mechanism as in BIP 34 is used: when 751 out of a
sequence of 1001 blocks have version number 3 or higher, the new consensus
rule becomes active for those blocks. When 951 out of a sequence of 1001
blocks have version number 3 or higher, it becomes mandatory for all blocks.
Backward compatibility with current mining software is NOT provided, thus miners
should read the first paragraph of "Mining and relay policy enhancements" above.
0.10.0 Change log

Detailed release notes follow. This overview includes changes that affect external
behavior, not code moves, refactors or string updates.
RPC:
  • f923c07 Support IPv6 lookup in bitcoin-cli even when IPv6 only bound on localhost
  • b641c9c Fix addnode "onetry": Connect with OpenNetworkConnection
  • 171ca77 estimatefee / estimatepriority RPC methods
  • b750cf1 Remove cli functionality from bitcoind
  • f6984e8 Add "chain" to getmininginfo, improve help in getblockchaininfo
  • 99ddc6c Add nLocalServices info to RPC getinfo
  • cf0c47b Remove getwork() RPC call
  • 2a72d45 prioritisetransaction
  • e44fea5 Add an option -datacarrier to allow users to disable relaying/mining data carrier transactions
  • 2ec5a3d Prevent easy RPC memory exhaustion attack
  • d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation
  • 83f3543 Added argument to listaccounts to include watchonly addresses
  • 952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address
  • d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses
  • f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation
  • 0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account
  • 6c37f7f getrawchangeaddress: fail when keypool exhausted and wallet locked
  • ff6a7af getblocktemplate: longpolling support
  • c4a321f Add peerid to getpeerinfo to allow correlation with the logs
  • 1b4568c Add vout to ListTransactions output
  • b33bd7a Implement "getchaintips" RPC command to monitor blockchain forks
  • 733177e Remove size limit in RPC client, keep it in server
  • 6b5b7cb Categorize rpc help overview
  • 6f2c26a Closely track mempool byte total. Add "getmempoolinfo" RPC
  • aa82795 Add detailed network info to getnetworkinfo RPC
  • 01094bd Don't reveal whether password is <20 or >20 characters in RPC
  • 57153d4 rpc: Compute number of confirmations of a block from block height
  • ff36cbe getnetworkinfo: export local node's client sub-version string
  • d14d7de SanitizeString: allow '(' and ')'
  • 31d6390 Fixed setaccount accepting foreign address
  • b5ec5fe update getnetworkinfo help with subversion
  • ad6e601 RPC additions after headers-first
  • 33dfbf5 rpc: Fix leveldb iterator leak, and flush before gettxoutsetinfo
  • 2aa6329 Enable customising node policy for datacarrier data size with a -datacarriersize option
  • f877aaa submitblock: Use a temporary CValidationState to determine accurately the outcome of ProcessBlock
  • e69a587 submitblock: Support for returning specific rejection reasons
  • af82884 Add "warmup mode" for RPC server
  • e2655e0 Add unauthenticated HTTP REST interface to public blockchain data
  • 683dc40 Disable SSLv3 (in favor of TLS) for the RPC client and server
  • 44b4c0d signrawtransaction: validate private key
  • 9765a50 Implement BIP 23 Block Proposal
  • f9de17e Add warning comment to getinfo
Command-line options:
  • ee21912 Use netmasks instead of wildcards for IP address matching
  • deb3572 Add -rpcbind option to allow binding RPC port on a specific interface
  • 96b733e Add -version option to get just the version
  • 1569353 Add -stopafterblockimport option
  • 77cbd46 Let -zapwallettxes recover transaction meta data
  • 1c750db remove -tor compatibility code (only allow -onion)
  • 4aaa017 rework help messages for fee-related options
  • 4278b1d Clarify error message when invalid -rpcallowip
  • 6b407e4 -datadir is now allowed in config files
  • bdd5b58 Add option -sysperms to disable 077 umask (create new files with system default umask)
  • cbe39a3 Add "bitcoin-tx" command line utility and supporting modules
  • dbca89b Trigger -alertnotify if network is upgrading without you
  • ad96e7c Make -reindex cope with out-of-order blocks
  • 16d5194 Skip reindexed blocks individually
  • ec01243 --tracerpc option for regression tests
  • f654f00 Change -genproclimit default to 1
  • 3c77714 Make -proxy set all network types, avoiding a connect leak
  • 57be955 Remove -printblock, -printblocktree, and -printblockindex
  • ad3d208 remove -maxorphanblocks config parameter since it is no longer functional
Block and transaction handling:
  • 7a0e84d ProcessGetData(): abort if a block file is missing from disk
  • 8c93bf4 LoadBlockIndexDB(): Require block db reindex if any blk*.dat files are missing
  • 77339e5 Get rid of the static chainMostWork (optimization)
  • 4e0eed8 Allow ActivateBestChain to release its lock on cs_main
  • 18e7216 Push cs_mains down in ProcessBlock
  • fa126ef Avoid undefined behavior using CFlatData in CScript serialization
  • 7f3b4e9 Relax IsStandard rules for pay-to-script-hash transactions
  • c9a0918 Add a skiplist to the CBlockIndex structure
  • bc42503 Use unordered_map for CCoinsViewCache with salted hash (optimization)
  • d4d3fbd Do not flush the cache after every block outside of IBD (optimization)
  • ad08d0b Bugfix: make CCoinsViewMemPool support pruned entries in underlying cache
  • 5734d4d Only remove actualy failed blocks from setBlockIndexValid
  • d70bc52 Rework block processing benchmark code
  • 714a3e6 Only keep setBlockIndexValid entries that are possible improvements
  • ea100c7 Reduce maximum coinscache size during verification (reduce memory usage)
  • 4fad8e6 Reject transactions with excessive numbers of sigops
  • b0875eb Allow BatchWrite to destroy its input, reducing copying (optimization)
  • 92bb6f2 Bypass reloading blocks from disk (optimization)
  • 2e28031 Perform CVerifyDB on pcoinsdbview instead of pcoinsTip (reduce memory usage)
  • ab15b2e Avoid copying undo data (optimization)
  • 341735e Headers-first synchronization
  • afc32c5 Fix rebuild-chainstate feature and improve its performance
  • e11b2ce Fix large reorgs
  • ed6d1a2 Keep information about all block files in memory
  • a48f2d6 Abstract context-dependent block checking from acceptance
  • 7e615f5 Fixed mempool sync after sending a transaction
  • 51ce901 Improve chainstate/blockindex disk writing policy
  • a206950 Introduce separate flushing modes
  • 9ec75c5 Add a locking mechanism to IsInitialBlockDownload to ensure it never goes from false to true
  • 868d041 Remove coinbase-dependant transactions during reorg
  • 723d12c Remove txn which are invalidated by coinbase maturity during reorg
  • 0cb8763 Check against MANDATORY flags prior to accepting to mempool
  • 8446262 Reject headers that build on an invalid parent
  • 008138c Bugfix: only track UTXO modification after lookup
P2P protocol and network code:
  • f80cffa Do not trigger a DoS ban if SCRIPT_VERIFY_NULLDUMMY fails
  • c30329a Add testnet DNS seed of Alex Kotenko
  • 45a4baf Add testnet DNS seed of Andreas Schildbach
  • f1920e8 Ping automatically every 2 minutes (unconditionally)
  • 806fd19 Allocate receive buffers in on the fly
  • 6ecf3ed Display unknown commands received
  • aa81564 Track peers' available blocks
  • caf6150 Use async name resolving to improve net thread responsiveness
  • 9f4da19 Use pong receive time rather than processing time
  • 0127a9b remove SOCKS4 support from core and GUI, use SOCKS5
  • 40f5cb8 Send rejects and apply DoS scoring for errors in direct block validation
  • dc942e6 Introduce whitelisted peers
  • c994d2e prevent SOCKET leak in BindListenPort()
  • a60120e Add built-in seeds for .onion
  • 60dc8e4 Allow -onlynet=onion to be used
  • 3a56de7 addrman: Do not propagate obviously poor addresses onto the network
  • 6050ab6 netbase: Make SOCKS5 negotiation interruptible
  • 604ee2a Remove tx from AlreadyAskedFor list once we receive it, not when we process it
  • efad808 Avoid reject message feedback loops
  • 71697f9 Separate protocol versioning from clientversion
  • 20a5f61 Don't relay alerts to peers before version negotiation
  • b4ee0bd Introduce preferred download peers
  • 845c86d Do not use third party services for IP detection
  • 12a49ca Limit the number of new addressses to accumulate
  • 35e408f Regard connection failures as attempt for addrman
  • a3a7317 Introduce 10 minute block download timeout
  • 3022e7d Require sufficent priority for relay of free transactions
  • 58fda4d Update seed IPs, based on bitcoin.sipa.be crawler data
  • 18021d0 Remove bitnodes.io from dnsseeds.
Validation:
  • 6fd7ef2 Also switch the (unused) verification code to low-s instead of even-s
  • 584a358 Do merkle root and txid duplicates check simultaneously
  • 217a5c9 When transaction outputs exceed inputs, show the offending amounts so as to aid debugging
  • f74fc9b Print input index when signature validation fails, to aid debugging
  • 6fd59ee script.h: set_vch() should shift a >32 bit value
  • d752ba8 Add SCRIPT_VERIFY_SIGPUSHONLY (BIP62 rule 2) (test only)
  • 698c6ab Add SCRIPT_VERIFY_MINIMALDATA (BIP62 rules 3 and 4) (test only)
  • ab9edbd script: create sane error return codes for script validation and remove logging
  • 219a147 script: check ScriptError values in script tests
  • 0391423 Discourage NOPs reserved for soft-fork upgrades
  • 98b135f Make STRICTENC invalid pubkeys fail the script rather than the opcode
  • 307f7d4 Report script evaluation failures in log and reject messages
  • ace39db consensus: guard against openssl's new strict DER checks
  • 12b7c44 Improve robustness of DER recoding code
  • 76ce5c8 fail immediately on an empty signature
Build system:
  • f25e3ad Fix build in OS X 10.9
  • 65e8ba4 build: Switch to non-recursive make
  • 460b32d build: fix broken boost chrono check on some platforms
  • 9ce0774 build: Fix windows configure when using --with-qt-libdir
  • ea96475 build: Add mention of --disable-wallet to bdb48 error messages
  • 1dec09b depends: add shared dependency builder
  • c101c76 build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix
  • e432a5f build: add option for reducing exports (v2)
  • 6134b43 Fixing condition 'sabotaging' MSVC build
  • af0bd5e osx: fix signing to make Gatekeeper happy (again)
  • a7d1f03 build: fix dynamic boost check when --with-boost= is used
  • d5fd094 build: fix qt test build when libprotobuf is in a non-standard path
  • 2cf5f16 Add libbitcoinconsensus library
  • 914868a build: add a deterministic dmg signer
  • 2d375fe depends: bump openssl to 1.0.1k
  • b7a4ecc Build: Only check for boost when building code that requires it
Wallet:
  • b33d1f5 Use fee/priority estimates in wallet CreateTransaction
  • 4b7b1bb Sanity checks for estimates
  • c898846 Add support for watch-only addresses
  • d5087d1 Use script matching rather than destination matching for watch-only
  • d88af56 Fee fixes
  • a35b55b Dont run full check every time we decrypt wallet
  • 3a7c348 Fix make_change to not create half-satoshis
  • f606bb9 fix a possible memory leak in CWalletDB::Recover
  • 870da77 fix possible memory leaks in CWallet::EncryptWallet
  • ccca27a Watch-only fixes
  • 9b1627d [Wallet] Reduce minTxFee for transaction creation to 1000 satoshis
  • a53fd41 Deterministic signing
  • 15ad0b5 Apply AreSane() checks to the fees from the network
  • 11855c1 Enforce minRelayTxFee on wallet created tx and add a maxtxfee option
GUI:
  • c21c74b osx: Fix missing dock menu with qt5
  • b90711c Fix Transaction details shows wrong To:
  • 516053c Make links in 'About Bitcoin Core' clickable
  • bdc83e8 Ensure payment request network matches client network
  • 65f78a1 Add GUI view of peer information
  • 06a91d9 VerifyDB progress reporting
  • fe6bff2 Add BerkeleyDB version info to RPCConsole
  • b917555 PeerTableModel: Fix potential deadlock. #4296
  • dff0e3b Improve rpc console history behavior
  • 95a9383 Remove CENT-fee-rule from coin control completely
  • 56b07d2 Allow setting listen via GUI
  • d95ba75 Log messages with type>QtDebugMsg as non-debug
  • 8969828 New status bar Unit Display Control and related changes
  • 674c070 seed OpenSSL PNRG with Windows event data
  • 509f926 Payment request parsing on startup now only changes network if a valid network name is specified
  • acd432b Prevent balloon-spam after rescan
  • 7007402 Implement SI-style (thin space) thoudands separator
  • 91cce17 Use fixed-point arithmetic in amount spinbox
  • bdba2dd Remove an obscure option no-one cares about
  • bd0aa10 Replace the temporary file hack currently used to change Bitcoin-Qt's dock icon (OS X) with a buffer-based solution
  • 94e1b9e Re-work overviewpage UI
  • 8bfdc9a Better looking trayicon
  • b197bf3 disable tray interactions when client model set to 0
  • 1c5f0af Add column Watch-only to transactions list
  • 21f139b Fix tablet crash. closes #4854
  • e84843c Broken addresses on command line no longer trigger testnet
  • a49f11d Change splash screen to normal window
  • 1f9be98 Disable App Nap on OSX 10.9+
  • 27c3e91 Add proxy to options overridden if necessary
  • 4bd1185 Allow "emergency" shutdown during startup
  • d52f072 Don't show wallet options in the preferences menu when running with -disablewallet
  • 6093aa1 Qt: QProgressBar CPU-Issue workaround
  • 0ed9675 [Wallet] Add global boolean whether to send free transactions (default=true)
  • ed3e5e4 [Wallet] Add global boolean whether to pay at least the custom fee (default=true)
  • e7876b2 [Wallet] Prevent user from paying a non-sense fee
  • c1c9d5b Add Smartfee to GUI
  • e0a25c5 Make askpassphrase dialog behave more sanely
  • 94b362d On close of splashscreen interrupt verifyDB
  • b790d13 English translation update
  • 8543b0d Correct tooltip on address book page
Tests:
  • b41e594 Fix script test handling of empty scripts
  • d3a33fc Test CHECKMULTISIG with m == 0 and n == 0
  • 29c1749 Let tx (in)valid tests use any SCRIPT_VERIFY flag
  • 6380180 Add rejection of non-null CHECKMULTISIG dummy values
  • 21bf3d2 Add tests for BoostAsioToCNetAddr
  • b5ad5e7 Add Python test for -rpcbind and -rpcallowip
  • 9ec0306 Add CODESEPARATOFindAndDelete() tests
  • 75ebced Added many rpc wallet tests
  • 0193fb8 Allow multiple regression tests to run at once
  • 92a6220 Hook up sanity checks
  • 3820e01 Extend and move all crypto tests to crypto_tests.cpp
  • 3f9a019 added list/get received by address/ account tests
  • a90689f Remove timing-based signature cache unit test
  • 236982c Add skiplist unit tests
  • f4b00be Add CChain::GetLocator() unit test
  • b45a6e8 Add test for getblocktemplate longpolling
  • cdf305e Set -discover=0 in regtest framework
  • ed02282 additional test for OP_SIZE in script_valid.json
  • 0072d98 script tests: BOOLAND, BOOLOR decode to integer
  • 833ff16 script tests: values that overflow to 0 are true
  • 4cac5db script tests: value with trailing 0x00 is true
  • 89101c6 script test: test case for 5-byte bools
  • d2d9dc0 script tests: add tests for CHECKMULTISIG limits
  • d789386 Add "it works" test for bitcoin-tx
  • df4d61e Add bitcoin-tx tests
  • aa41ac2 Test IsPushOnly() with invalid push
  • 6022b5d Make script_{valid,invalid}.json validation flags configurable
  • 8138cbe Add automatic script test generation, and actual checksig tests
  • ed27e53 Add coins_tests with a large randomized CCoinViewCache test
  • 9df9cf5 Make SCRIPT_VERIFY_STRICTENC compatible with BIP62
  • dcb9846 Extend getchaintips RPC test
  • 554147a Ensure MINIMALDATA invalid tests can only fail one way
  • dfeec18 Test every numeric-accepting opcode for correct handling of the numeric minimal encoding rule
  • 2b62e17 Clearly separate PUSHDATA and numeric argument MINIMALDATA tests
  • 16d78bd Add valid invert of invalid every numeric opcode tests
  • f635269 tests: enable alertnotify test for Windows
  • 7a41614 tests: allow rpc-tests to get filenames for bitcoind and bitcoin-cli from the environment
  • 5122ea7 tests: fix forknotify.py on windows
  • fa7f8cd tests: remove old pull-tester scripts
  • 7667850 tests: replace the old (unused since Travis) tests with new rpc test scripts
  • f4e0aef Do signature-s negation inside the tests
  • 1837987 Optimize -regtest setgenerate block generation
  • 2db4c8a Fix node ranges in the test framework
  • a8b2ce5 regression test only setmocktime RPC call
  • daf03e7 RPC tests: create initial chain with specific timestamps
  • 8656dbb Port/fix txnmall.sh regression test
  • ca81587 Test the exact order of CHECKMULTISIG sig/pubkey evaluation
  • 7357893 Prioritize and display -testsafemode status in UI
  • f321d6b Add key generation/verification to ECC sanity check
  • 132ea9b miner_tests: Disable checkpoints so they don't fail the subsidy-change test
  • bc6cb41 QA RPC tests: Add tests block block proposals
  • f67a9ce Use deterministically generated script tests
  • 11d7a7d [RPC] add rpc-test for http keep-alive (persistent connections)
  • 34318d7 RPC-test based on invalidateblock for mempool coinbase spends
  • 76ec867 Use actually valid transactions for script tests
  • c8589bf Add actual signature tests
  • e2677d7 Fix smartfees test for change to relay policy
  • 263b65e tests: run sanity checks in tests too
Miscellaneous:
  • 122549f Fix incorrect checkpoint data for testnet3
  • 5bd02cf Log used config file to debug.log on startup
  • 68ba85f Updated Debian example bitcoin.conf with config from wiki + removed some cruft and updated comments
  • e5ee8f0 Remove -beta suffix
  • 38405ac Add comment regarding experimental-use service bits
  • be873f6 Issue warning if collecting RandSeed data failed
  • 8ae973c Allocate more space if necessary in RandSeedAddPerfMon
  • 675bcd5 Correct comment for 15-of-15 p2sh script size
  • fda3fed libsecp256k1 integration
  • 2e36866 Show nodeid instead of addresses in log (for anonymity) unless otherwise requested
  • cd01a5e Enable paranoid corruption checks in LevelDB >= 1.16
  • 9365937 Add comment about never updating nTimeOffset past 199 samples
  • 403c1bf contrib: remove getwork-based pyminer (as getwork API call has been removed)
  • 0c3e101 contrib: Added systemd .service file in order to help distributions integrate bitcoind
  • 0a0878d doc: Add new DNSseed policy
  • 2887bff Update coding style and add .clang-format
  • 5cbda4f Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope
  • b4a72a7 contrib/linearize: split output files based on new-timestamp-year or max-file-size
  • e982b57 Use explicit fflush() instead of setvbuf()
  • 234bfbf contrib: Add init scripts and docs for Upstart and OpenRC
  • 01c2807 Add warning about the merkle-tree algorithm duplicate txid flaw
  • d6712db Also create pid file in non-daemon mode
  • 772ab0e contrib: use batched JSON-RPC in linarize-hashes (optimization)
  • 7ab4358 Update bash-completion for v0.10
  • 6e6a36c contrib: show pull # in prompt for github-merge script
  • 5b9f842 Upgrade leveldb to 1.18, make chainstate databases compatible between ARM and x86 (issue #2293)
  • 4e7c219 Catch UTXO set read errors and shutdown
  • 867c600 Catch LevelDB errors during flush
  • 06ca065 Fix CScriptID(const CScript& in) in empty script case
Credits

Thanks to everyone who contributed to this release:
  • 21E14
  • Adam Weiss
  • Aitor Pazos
  • Alexander Jeng
  • Alex Morcos
  • Alon Muroch
  • Andreas Schildbach
  • Andrew Poelstra
  • Andy Alness
  • Ashley Holman
  • Benedict Chan
  • Ben Holden-Crowther
  • Bryan Bishop
  • BtcDrak
  • Christian von Roques
  • Clinton Christian
  • Cory Fields
  • Cozz Lovan
  • daniel
  • Daniel Kraft
  • David Hill
  • Derek701
  • dexX7
  • dllud
  • Dominyk Tiller
  • Doug
  • elichai
  • elkingtowa
  • ENikS
  • Eric Shaw
  • Federico Bond
  • Francis GASCHET
  • Gavin Andresen
  • Giuseppe Mazzotta
  • Glenn Willen
  • Gregory Maxwell
  • gubatron
  • HarryWu
  • himynameismartin
  • Huang Le
  • Ian Carroll
  • imharrywu
  • Jameson Lopp
  • Janusz Lenar
  • JaSK
  • Jeff Garzik
  • JL2035
  • Johnathan Corgan
  • Jonas Schnelli
  • jtimon
  • Julian Haight
  • Kamil Domanski
  • kazcw
  • kevin
  • kiwigb
  • Kosta Zertsekel
  • LongShao007
  • Luke Dashjr
  • Mark Friedenbach
  • Mathy Vanvoorden
  • Matt Corallo
  • Matthew Bogosian
  • Micha
  • Michael Ford
  • Mike Hearn
  • mrbandrews
  • mruddy
  • ntrgn
  • Otto Allmendinger
  • paveljanik
  • Pavel Vasin
  • Peter Todd
  • phantomcircuit
  • Philip Kaufmann
  • Pieter Wuille
  • pryds
  • randy-waterhouse
  • R E Broadley
  • Rose Toomey
  • Ross Nicoll
  • Roy Badami
  • Ruben Dario Ponticelli
  • Rune K. Svendsen
  • Ryan X. Charles
  • Saivann
  • sandakersmann
  • SergioDemianLerner
  • shshshsh
  • sinetek
  • Stuart Cardall
  • Suhas Daftuar
  • Tawanda Kembo
  • Teran McKinney
  • tm314159
  • Tom Harding
  • Trevin Hofmann
  • Whit J
  • Wladimir J. van der Laan
  • Yoichi Hirai
  • Zak Wilcox
As well as everyone that helped translating on [Transifex](https://www.transifex.com/projects/p/bitcoin/).
Also lots of thanks to the bitcoin.org website team David A. Harding and Saivann Carignan.
Wladimir
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-February/007480.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

support p2pool nodes!

Help us find our first block!
p2pool total nodes at 10MH/s, join in on it, PPLNS pays out better over time then PROP or PPS!!
If you need to configure p2pool on your own server, use the following:
https://github.com/Rav3nPL/p2pool-rav/tree/coye
networks.py
 coinye=math.Object( PARENT=networks.nets['coinye'], SHARE_PERIOD=15, # seconds CHAIN_LENGTH=3*60*60//10, # shares REAL_CHAIN_LENGTH=3*60*60//10, # shares TARGET_LOOKBEHIND=20, # shares SPREAD=10, # blocks IDENTIFIER='D0D1F1D3B2F68CDD'.decode('hex'), PREFIX='F2D3D4D541C11DDD'.decode('hex'), P2P_PORT=8557, MIN_TARGET=0, MAX_TARGET=2**256//2**20 - 1, PERSIST=False, WORKER_PORT=9557, BOOTSTRAP_ADDRS='us-east1.cryptovein.com p2pool-eu.gotgeeks.com p2pool-us.gotgeeks.com rav3n.dtdns.net p2pool.gotgeeks.com p2pool.dndns.net solidpool.org'.split(' '), ANNOUNCE_CHANNEL='#p2pool-alt', VERSION_CHECK=lambda v: True, ), 
bitcoin/networks.py
 coinye=math.Object( P2P_PREFIX='f9f7c0e8'.decode('hex'), P2P_PORT=41338, ADDRESS_VERSION=11, RPC_PORT=41337, RPC_CHECK=defer.inlineCallbacks(lambda bitcoind: defer.returnValue( 'coinyecoinaddress' in (yield bitcoind.rpc_help()) and not (yield bitcoind.rpc_getinfo())['testnet'] )), SUBSIDY_FUNC=lambda height: 666666*100000000, POW_FUNC=lambda data: pack.IntType(256).unpack(__import__('ltc_scrypt').getPoWHash(data)), BLOCK_PERIOD=90, # s SYMBOL='COYE', CONF_FILE_FUNC=lambda: os.path.join(os.path.join(os.environ['APPDATA'], 'coinyecoin') if platform.system() == 'Windows' else os.path.expanduser('~/Library/Application Support/coinyecoin/') if platform.system() == 'Darwin' else os.path.expanduser('~/.coinyecoin'), 'coinyecoin.conf'), BLOCK_EXPLORER_URL_PREFIX='http://coinyechain.info/block/', ADDRESS_EXPLORER_URL_PREFIX='http://coinyechain.info/address/', TX_EXPLORER_URL_PREFIX='http://coinyechain.info/tx/', SANE_TARGET_RANGE=(2**256//1000000000 - 1, 2**256//1000 - 1), DUMB_SCRYPT_DIFF=2**16, DUST_THRESHOLD=0.03e8, ), 
submitted by crucif0rm to coinyecoin [link] [comments]

Fastcoin recommended settings for P2Pool nodes

), fastcoin=math.Object( PARENT=networks.nets['fastcoin'], SHARE_PERIOD=6, # seconds NEW_SHARE_PERIOD=6, # seconds CHAIN_LENGTH=24*60*60//10, # shares REAL_CHAIN_LENGTH=24*60*60//10, # shares TARGET_LOOKBEHIND=60, # shares SPREAD=150, # blocks NEW_SPREAD=150, # blocks IDENTIFIER='9f2e390aa41ffade'.decode('hex'), PREFIX='50f713ab040dfade'.decode('hex'), P2P_PORT=23660, MIN_TARGET=0, MAX_TARGET=2**256//2**20 - 1, PERSIST=False, WORKER_PORT=5150, BOOTSTRAP_ADDRS='fst.inetrader.com'.split(' '), ANNOUNCE_CHANNEL='#p2pool-fst', VERSION_CHECK=lambda v: True, VERSION_WARNING=lambda v: 'Upgrade Fastcoin to >= 0.8.5.1!' if v < 70002 else None, ), 

p2pool/bitcoin/networks.py

), fastcoin=math.Object( P2P_PREFIX='fbc0b6db'.decode('hex'), P2P_PORT=9526, ADDRESS_VERSION=96, RPC_PORT=9527, RPC_CHECK=defer.inlineCallbacks(lambda bitcoind: defer.returnValue( 'fastcoinaddress' in (yield bitcoind.rpc_help()) and not (yield bitcoind.rpc_getinfo())['testnet'] )), SUBSIDY_FUNC=lambda height: 32*100000000 >> (height + 1)//2592000, POW_FUNC=lambda data: pack.IntType(256).unpack(__import__('ltc_scrypt').getPoWHash(data)), BLOCK_PERIOD=12, # s SYMBOL='FST', CONF_FILE_FUNC=lambda: os.path.join(os.path.join(os.environ['APPDATA'], 'Fastcoin') if platform.system() == 'Windows' else os.path.expanduser('~/Library/Application Support/Fastcoin/') if platform.system() == 'Darwin' else os.path.expanduser('~/.fastcoin'), 'fastcoin.conf'), BLOCK_EXPLORER_URL_PREFIX='http://fst.webboise.com/block/', ADDRESS_EXPLORER_URL_PREFIX='http://fst.webboise.com/address/', TX_EXPLORER_URL_PREFIX='http://fst.webboise.com/tx/', SANE_TARGET_RANGE=(2**256//100000000 - 1, 2**256//1000 - 1), DUMB_SCRYPT_DIFF=2**16, DUST_THRESHOLD=0.03e8, ), 
submitted by m0gliE to fst [link] [comments]

How to use Excel to fetch Bitcoin Trading info? Best Bitcoin Exchange How To Get Free Bitcoin Blockchain.info Coinatmradar.com and How To Buy Bitcoin from an ATM How to get free Bitcoins Balance of any Bitcoin address into Excel (Macro included)

Basic econ 101 lesson on bitcoin the two things that give value to bitcoin is scarcity and utility, … Read Full Article about Truth about bitcoin does it have intrinsic value Warren Buffett says its a joke … Read Full Article. Bitcoin explained: How do cryptocurrencies work? … Read Full Article . February 13, 2018. BBC News has the the best example I have ever seen how bitcoin works and ... I want to get Bitcoin value for corresponding USD value and store it in table or variable. I got this URL from which I can get a Bitcoin value for USK amount. I searched on blockchain and I found t... Bitcoin price today is $13,073.32 USD with a 24-hour trading volume of $23,603,626,066 USD. Bitcoin is up 0.48% in the last 24 hours. The current CoinMarketCap ranking is #1, with a market cap of $242,210,721,011 USD. It has a circulating supply of 18,527,100 BTC coins and a max. supply of 21,000,000 BTC coins. You can find the top exchanges to trade Bitcoin listed on our This PR is a client-side version of #18453, per review feedback there and review club discussions.It updates bitcoin-cli -getinfo on the client side to display wallet name and balance for the loaded wallets when more than one is loaded (e.g. you are in "multiwallet mode") and -rpcwallet= is not passed; otherwise, behavior is unchanged.. before Blockchain.com is the most popular place to securely buy, store, and trade Bitcoin, Ethereum, and other top cryptocurrencies. Wallet; Exchange; Explorer; Log In Sign Up. The World's Most Popular Way to Buy, Hold, and Use Crypto. Trusted by 51M Wallets - with Over $620 Billion in Transactions - Since 2013 . Get Started. The Easiest and Most Powerful Crypto Wallet. Create A Wallet Learn More ...

[index] [4212] [30373] [48134] [8605] [21126] [40025] [47190] [50605] [14165] [28529]

How to use Excel to fetch Bitcoin Trading info?

dapscoin-cli getinfo dapscoin-cli getblockchaininfo dapscoind -reindex dapscoin-cli masternode status CONFIGURAR MASTERNODE.CONF NA VPS 1ºPASSO: baixar o programa WinSCP 2ºPASSO: digitar root ... For more info concerning Bitcoin wallet card, litecoin wallet card, kindly visit website right here: http://www.cryptocoinwalletcards.com/ Tags: asic bitcoin... At least for some, bitcoin is seen to have both scarcity and utility. That makes it valuable. » Subscribe to CNBC: http://cnb.cx/SubscribeCNBC About CNBC: Fr... In this tutorial I have demonstrated how you could fetch Bitcoin trading i.e. Daily change, currency value, trends and live orders. Get free bitcoins from www.D3FC.com You can collect from 100 bitcoin faucets via the land of bitcoin while playing video games, earning a future value of $11 an hour in bitcoin assets.

#